Limited Special – Wall Mount 5kWh Lithium Battery (48V 100ah) – BMS compatible with MPP Solar




Wall Mount Battery , vertically stackable, side cover on battery opens up and conceals all wiring, cables to link battery to battery are included

Instructions for MPP Solar Inverters  (LVX6048, LV6548)  Set Protocol to “LIB” on inverter.  (see attached pictures for settings)

Use supplied BMS Comms cable  (pins 1 and 2 on battery go to pins 3 and 5 on inverter BMS port  [ 1 to 3, 2 to 5])

Set battery address dial to “0”, install RS485 termination plug (supplied) into one of the inter battery RS485 comm ports  (see pics)

and thats it.

This battery can be used in “dumb” mode – no comms with any other 48V battery system in order to increase battery capacity, and on any 48V inverter

battery Manual:

battery LED Status:



Nominal DC Voltage: 48 VDC
Maximum Charging Current: 120 A
Dimension: (D x W x H): 8.4″ x 24.4″ x 19.7″
Net Weight: 99 lb
Capacity: 5120Wh
Nominal Voltage: 51.2VDC
Full Charge Voltage(FC): 56V
Full Discharge Voltage(FD): 42V
Typical Capacity: 100 Ah
Max Continuous Discharging Current: 120A
Max Discharging Current: 192A at 1 min
Protection: BMS, Breaker
Float Charge Voltage: 52.5V
Charge Current: 20A (0.2C)
Maximum Charge current: 50A (0.5C)
Standard Charge method: 0.2C CC (Constant current) charge to FC, CV (Constant voltage FC) charge till charge current declines to <0.05C
Inner Resistance: ≤20m ohm

Additional information

Weight 160 lbs
Dimensions 40 × 32 × 15 in