PIP 2724LV-MR 24V 2.7kW 120V Inverter, 750W Solar Input, Easy DIY, No 120V Wiring!

$442.00

SKU: 2724LV-MR Category:

Description

The more I look at this unit, the more I like it. Latest Arrival from MPP Solar,

It comes complete with Battery cables, simply plug it into the Inverter, and connect the battery side to the pre made crimp lugs 5/16th hole diameter

Ideal for RVs and Portable camping units where roof/solar space is limited (750W solar input capacity Max 60V dc PV Input MPPT)

4 Female 15/25A outlets right on the side of the unit – no wiring required

3 x USB ports as shown

I think its the one im choosing for my RV.

Here are some more bullet points. (check out the spec sheet image above)

110-120Vac 50/60Hz output for North America

Clean Output voltage regardless of input from Generator/Grid (AVR Function)

Max 2.7kW Pure sine Wave Output

Max 25A / 24V MPPT solar controller (750W) + Grid/Generator Charger

MPPT Voltage range, 30 to 60VDC

Built in 3 x USB Ports 5V 3A

Built In 25A Female Power sockets for output

24V DC Battery System

Programmable Parameters

Adjustable bulk and Float charging voltages (Lead acid, AGM, LiFePO4 and Li-Ion compatibility)

Supports grid or generator input(inverter type only at least 150% higher rating than load)

Overload and short Circuit Protection

Lightweight and easy installation

Monitoring Software Included

RS232 & USB Communications

LCD Display & LED Indicators

4 x 15A/120V ac North America plug outlets on side of unit

Portable, plug and play, no need to be clued up at all about electricity. Just make sure RED goes to Battery Positive, and Black to Battery Negative (24V Battery required – otherwise no workie!)

Solar Panels plug right into the Inverter with MC4 connectors

Easy Peasy

 

Links:

 

Additional information

Weight 31 lbs
Dimensions 20 × 19 × 8 in