PYTES LiFePO4 48V 5.1kWh battery-10yr Warranty Rack/Floor Mount Mil Spec redundant BMS. Protocols- Growatt / MPP Solar / Solark / SMA

$1,999.00

Category:

Description

Double Redundancy Military Spec Texas Instruments chips used on BMS main-board

Expandable to 72kWh in a single system. (12 pcs)

10 Year Warranty 6000 Cycles 90% DOD , the most flexible battery protocol
Residential Energy Storage System

Battery 4 AWG Interconnect & CAT5 Cables included

Click Link  Here for PDF Resources Manuals, Specs ,Warranty

Quick GW Inverter Configuration instructions.

On Battery set dip switch #3 UP, all others DOWN

Communication Cable:  available here    (One cable required per Inverter)

  • Plug in PYTES / Growatt Communication cable marked “Battery” into Battery Can Bus Port
  • Plug in end marked “HUB” into Growatt CANBUS port,
  • Do the above for each inverter connected in parallel to the same battery cluster

On Inverter:

Set battery type (setting 05) to LI

and Protocol to be L51 (Setting 34 , immediately follows from above)

If the Inverter does not supply AC power after the above, set setting 05 to AGM , and retry settings above.

Troubleshooting: Fault 20 indicates communication failure, Fault 04 = low battery

NOTE: Inverter will not output 120V if BMS communication is lost (and battery type is set to LI)

 

Quick MPP Solar Inverter Configuration

 

On Battery, set dip switches on each battery according to the address ,E.g.  First battery, all down, 2nd – 1 up, 3rd – 2 up, 4th – 1 & 2 up, 5th – 3 up, 6th – 3 & 1 up, 7th 3 & 2 up, 8th 3 & 2 & 1 up

Communication Cable:  available here    (One cable required for one inverter communicating with the battery)

On ONE Inverter with cable connected  (connect end marked “Battery” into Battery “Serial” [= RS485 Port- –NOT the CAN Port],  End Marked “Voltronic” into Inverter Battery port)

On inverter with battery communications cable connected Set battery type (setting 05 on LV6548) (setting 14 on LVX6048) etc  to “PYL”

On all other inverters connected in Parallel, set battery type to “USE”

 

Troubleshooting:

Fault 61 on the LV6548 indicates battery communication failure

On the LVX6048, a warning beep sound along with the fault LED

NOTE: If all is working, the battery ICON on the LV6548 will flash, on the LVX6048 a flashing battery outline indicates BMS communication

 

MECHANICAL SPECIFICATIONS

Please see Images in listing

Additional information

Weight 115 lbs
Dimensions 24 × 24 × 11 in

Reviews

There are no reviews yet.

Be the first to review “PYTES LiFePO4 48V 5.1kWh battery-10yr Warranty Rack/Floor Mount Mil Spec redundant BMS. Protocols- Growatt / MPP Solar / Solark / SMA”

Your email address will not be published. Required fields are marked *